Sfp-1gsxlc pdf

EDR-G903 Series The EDR-G903 series is a Gigabit performance, all-in-one Firewall/ VPN/Router device for Ethernet security applications in sensitive remote control or monitoring networks and critical industrial assets. The EDR-G903 supports one WAN, one LAN, and a user-configurable WAN/DMZ interface that provides high flexibility in EDS-518A Series Introduction The EDS-518A is a standalone 18-port managed Ethernet switch that provides 2 combo Gigabit ports with built-in RJ45 or SFP slots for Gigabit fiber optic communication. The Ethernet redundant Turbo Ring • IPv6 Ready logo awarded (IPv6 Logo Committee certified) • IEEE 1588 PTP (Precision Time Protocol) for precise 1 moxa.com info@moxa.com Industrial Ethernet Solutions Interface Ethernet Ports: 1 Connectors: Duplex LC Connector or Simplex LC Connector (WDM-type only) Note: WDM-type SFP modules must be used in pairs (e.g., SFP-1GXXALC and SFP-1GXXBLC) Optical Fiber Saturation b. 62.5/125 ?m, 750 MHz * km @ 1310 nm multi-mode fiber optic cable Perle SFP Optical Transceivers can be used and interchanged on a wide variety of Cisco or MSA compliant SFP products. They can be intermixed in combinations of 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. * SFP-1GSXLC-T: -20 to 75?C operating temperature WDM-type (BiDi) SFP Modules Availabe Models Port Interface Standard Temperature (0 to 60?C) Wide Temperature (-40 to 85?C) 1000BaseSFP, LC Connector, 10 km 1000BaseSFP, LC Connector, 20 km 1000BaseSFP, LC Connector, 40 km TX 1310 nm, RX 1550 nm TX 1550 nm, RX 1310 nm TX 1310 nm, RX 1550 nm TX 100BASE FX SFP transceiver is a high performance, cost effective module that provides full-duplex 100Mbps connectivity between switches over multi-mode fiber (MMF) infrastructures. The 100base-FX SFP operates on ordinary multimode fiber optical link spans EDR-G902 Series The EDR-G902 series is a Gigabit performance, all-in-one Firewall/ VPN/Router. It is designed for Ethernet security applications in sensitive remote control or monitoring networks, and provides an Electronic Security Perimeter for the protection of critical cyber assets The SFP-1G series modules can be used with the following products EDS-728/828 series: IM-2GSFP series Gigabit Ethernet interface modules EDS-611/619 series: 8+3G/16+3G-port compact modular managed Ethernet switches EDS-G509 series: 9G-port full Gigabit managed Ethernet switches EDS-518A series: 16+2G-port Gigabit managed Ethernet switches SFP-1GSXLC-T - Small Form Factor pluggable transceiver with 1000BaseSX, LC connector, 0.5 km, -20 to 75 Degree C - SFP-DUPLEX - iComTech Compliant with IEEE 802.3z ,Differential LVPECL inputs and outputs ,Single 3.3 V power supply ,TTL signal detect indicator ,Hot pluggable ,Class 1 laser product, complies with EN60825-1 * SFP-1GSXLC-T: -20 to 75?C operating temperature WDM-type (BiDi) SFP Modules Availabe Models Port Interface Standard Temperature (0 to 60?C) Wide Temperature (-40 to 85?C) 1000BaseSFP, LC Connector, 10 km 1000BaseSFP, LC Connector, 20 km 1000BaseSFP, IM-G7000A Series Gigabit Ethernet Interface Modules, IM-G7000A Series 4G-port Gigabit Ethernet interface modules for ICS-G7748A/G7750A/G7752A/ G7848A/G7850A/G7852A series modular managed Ethernet switches Front View Top View Side View Dimensions Specifications Ordering Information IM-G7000A-4GTX Unit: mm (inch) IM-G7000A-4GSFP IM-G7000A-4PoE IM-G7000A Series Gigabit Ethernet Interface Modules, IM-G7000A Series 4G-port Gigabit Ethernet interface modules for