Redarc tow pro manual to auto

How do you adjust a Redarc brake controller? In User Controlled mode the manual override will apply the trailer brakes to the level set on the gain control knob. In both modes the braking force can be adjusted by turning the gain control knob, either higher or lower, whilst applying the manual override brakes . fileslib. To engage the manual override, just push down on the control knob. This will activate the trailers brakes, helping you to control its momentum. Tow Pro. Elite. Electric Trailer Brake Controller. AUSTR. REDARC from either 12V or 24V vehicle systems without the need for manual selection or extra.
Why does my Redarc flash blue and green? This is normal and the unit is in sleep mode . Breathing, as opposed to flashing, is the LED gradually getting brighter until its brightest point and then gradually dimming off. Whilst driving with the trailer connected, the LED indicator will flash blue and green.
How do I know if my Redarc brake controller is working? To test your Tow-Pro Elite brake controller, connect a 21W globe between the earth pin (3) and trailer brake pin (5) of your trailer base. The LED should illuminate BLUE or GREEN depending in what mode it's in. Once the remote head is GREEN, have someone watch the test light.