Packetfence configuration tutorial ~494~

Have you configured role mapping on switch configuration on the PacketFence? I don't know much about PacketFence but I'm assuing you'll need to configure the "Role by Switch Role" section in your switch config. To me it soundsmore like a PacketFence config issuerather than something on your Instant config. Cheers. James

Your configuration for the tab "Roles" in PacketFence will look like the following: PacketFence Configuration. In the configuration of PacketFence, use "Role by VLAN ID" and fill your VLANs matching roles. RADSEC. It is possible to use RADSEC between Meraki and PacketFence in order to perform RADIUS over TCP and encrypted using TLS. [Packetfence-users] Switch Configuration Questions. From: Andrew Niemantsverdriet - 2008-11-18 19:23:08. I am using struggling through setting up a test network so forgive to n00bness. I am using a single HP 2524 connected to my PacketFenceZEN. I have a couple basic questions. Now, configure PacketFence's access to VLAN 1, 2 and 3. Set the configuration of the switch port that PacketFence plugs into to "trunk mode", and allow packets in VLAN 1 to pass through the switch without tagging. On the PacketFence server, add two new NICs that read and write 802.1q tagged packets for VLAN 2 and 3. Actually m start working over monitoring and for that m using packetfence , i have done basic configuration and got web pag Packetfence configuration in running network with vlan enforcement. From the packetfence server side you will want to create an interface on each of your vlans PacketFence has been developed on Red Hat Enterprise Linux 4, CentOS 4 and Fedora Core. Several people have succeeded in running it on different distributions, but to ease your first installation, it might be better to stick with one of the officially supported distributions. domain default enable packetfence.local dot1x authentication-method eap port-security enable quit If your management authentication on your switch is def