152 basic router configuration lab manual

The only authorized Lab Manual for the Cisco Networking Academy Routing and Switching Essentials course in the CCNA Routing and Switching curriculum Lab Manuals provide students enrolled in a Cisco Networking Academy course of the same name with a convenient, complete collection of all the course lab exercises that provide hands-on practice and challenges.

Lab 1.5.1: Cabling a Network and Basic Router Configuration Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 Fa0/0 Lab 1.5.2: Basic Router Configuration, if your instructor determines that you are About This Lab Manual Scaling Networks Lab Manual contains all the labs and class activities from the Cisco Networking Academy course of the same name. It is meant to be used within this program of study. More Practice If you would like more practice activities, combine your Lab Manual with the new CCNA Routing and Switching Practice Note: If you use 1700, 2500, or 2600 routers, the router outputs and interface descriptions appear differently. Step 2: Clear any existing configurations on the routers. Task 2: Perform Basic Router Configuration Configure the R1, R2, and R3 routers according to the following guidelines: • Configure the router hostname. CCNA Exploration Routing Protocols and Concepts: Introduction to Routing and Packet Forwarding Lab 1.5.2: Basic Router Configuration Task 1: Cable the Network. Cable a network that is similar to the one in the Topology Diagram. The output used in this lab is from 1841 routers. You can use any current router in your lab as long as it has the required interfaces as shown in the topology. Major problems can result if router setup is done incorrectly. This guide explains the overall step-by-step process for home broadband router setup. Major problems can result if router setup is done incorrectly. What to Do When Your Home Network Router Isn't Working. Set Up Your Wireless CCNA Routing and Switching Practice and Study Guid